HOW TO TURN ON THE POWER
1 Plug in the power cord (see HOW TO PLUG IN THE POWER CORD on page 9).
2 Locate the on/off switch on the treadmill
near the power cord. On Position
Move the on/off switch to the on position.
3 Stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 10) and slide the clip onto the waistband of your clothes. Next, insert the key into the console. After a moment, the displays and various indicators will light. Test the clip by carefully taking a few steps backward until the key is pulled from the console. If the key is not pulled from the con- sole, adjust the position of the clip as needed.
HOW TO USE THE MANUAL MODE
1 Insert the key fully into the console.
See HOW TO TURN ON THE POWER above.
2 Select the manual mode.
When the key is in- serted, the manual mode will be selected
and the MANUAL CONTROL indicator will
light. If a program has
been selected, press the PROGRAM button re- peatedly to select the manual mode.
3 Press the START button or the Speed ▲ button to start the walking belt.
A moment after the but- ton is pressed, the walking belt will begin to move at 1 mph. Hold the handrails and begin
walking. As you exer-
cise, change the speed of the walking belt as de- sired by pressing the Speed buttons. Each time a button is pressed, the speed setting will change by 0.1 mph; if a button is held down, the speed setting will change in increments of 0.5 mph. To change the speed setting quickly, press the QUICK SPEED buttons.
To stop the walking belt, press the STOP button. The TIME/INCLINE/SEGMENT TIME display will
begin to flash. To restart the walking belt, press the START button or the Speed ▲ button.
4 Change the incline of the treadmill as desired.
To change the incline of
the treadmill, press the INCLINE buttons. Each time a button is pressed,
the incline will change by 0.5%. Note: After the but-
tons are pressed, it may take a moment for the treadmill to reach the selected incline setting.
5 Follow your progress with the LED track and the displays.
The LED
play will show an LED track representing 1/4
mile. As you exercise,
the indicators around the track will light in sequence until you have completed 1/4 mile. A new lap will then begin.
CALORIES/FAT
CALORIES/ HEART RATE
calories and fat calories
you have burned (see FAT BURNING on page 24). The display will change from one number to the other every few seconds, as shown by the in- dicators in the display. The display will also show your heart rate when you use the thumb pulse sensor (refer to step 6 on page 12) or the optional chest pulse sensor (refer to page 19).
TIME/INCLINE/ SEGMENT TIME
play will show the elapsed
time and the incline level of the treadmill. The dis- play will change from one number to the other every few seconds, as shown by the indicators in the display. When a personal trainer program is selected, the display will show the time remaining in the program, the time remaining in the current segment of the program, and the incline level. Note: Each time the incline changes, the display will show the current incline setting for several seconds.
11