ProForm PCTL74100 user manual Operation and Adjustment, Performant Lubetm Walking Belt

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBETM WALKING BELT					vides a path of least resistance for electric current to
					reduce the risk of electric shock. This product is
Your treadmill features a walking belt coated with					equipped with a cord having an equipment-grounding
PERFORMANT LUBETM, a high-performance lubricant.					conductor and a grounding plug. Plug the power cord
Important: Never apply silicone spray or other sub-					into a surge protector, and plug the surge protec-
stances to the walking belt or the walking platform.					tor into an appropriate outlet that is properly in-
They will deteriorate the walking belt and cause ex-					stalled and grounded in accordance with all local
cessive wear.					codes and ordinances.
HOW TO PLUG IN THE POWER CORD					This product is for use on a nominal 120-volt circuit,
					and has a grounding plug that looks like the plug illus-
					trated in drawing 1 below. A temporary adapter that
	DANGER: Improper connection
					looks like the adapter illustrated in drawing 2 may be
					used to connect the surge protector to a 2-pole recep-
	of the equipment-grounding conductor can
					tacle as shown in drawing 2 if a properly grounded out-
	result in an increased risk of electric shock.
					let is not available.
	Check with a qualified electrician or service-
	man if you are in doubt as to whether the				The temporary adapter should be used only until a
	product is properly grounded. Do not modify
					properly grounded outlet (drawing 1) can be installed
	the plug provided with the product—if it will
					by a qualified electrician.
	not fit the outlet, have a proper outlet in-
	stalled by a qualified electrician.				The green-colored rigid ear, lug, or the like extending
					from the adapter must be connected to a permanent
Your treadmill, like any other type of sophisticated					ground such as a properly grounded outlet box cover.
					Whenever the adapter is used it must be held in place
electronic equipment, can be seriously damaged by
					by a metal screw. Some 2-pole receptacle outlet box
sudden voltage changes in your home’s power.
					covers are not grounded. Contact a qualified elec-
Voltage surges, spikes, and noise interference can re-
					trician to determine if the outlet box cover is
sult from weather conditions or from other appliances
					grounded before using an adapter.
being turned on or off.
To decrease the pos-
sibility of your tread-		1
			Grounded Outlet Box
mill being damaged,
						Treadmill Power Cord
always use a surge
				Grounding Pin
protector (not in-
cluded) with your
					Grounding Plug		Grounding Plug
treadmill.

Surge protectors are		Grounding Pin
sold at most hardware
		Grounded Outlet
stores and department
stores. Use only a CUL-
listed surge protector	2
with 450 joules mini-		Grounded Outlet Box
mum surge dissipation
rated at 15 amps, with a		Adapter
14-gauge cord of five		Grounding Pin
feet or less in length.

				Surge Protector
This product must be			Grounding Plug
grounded. If it should
		Lug
malfunction or break
down, grounding pro-	Metal Screw

7