![](/images/new-backgrounds/1134559/13455947x1.webp)
Locate the Reed Switch (18) and the Magnet (48) on
the left side of the Pulley (78). Turn the Pulley until the
Magnet is aligned with the Reed Switch. | Make sure |
that the gap between the Magnet and the Reed |
|
Switch is about 3 mm (1/8”). | If necessary, loosen |
the 3/4” Screw (24) and move the Reed Switch slightly. Retighten the Screw.
PROBLEM: The walking belt slows when walked on
3 mm |
|
24 | 78 |
| |
18 | 48 |
Top |
|
View |
|
SOLUTION: a. Use only a
b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be-
come damaged. Remove the key andUNPLUG THE
POWER CORD . Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should
be able to lift each side of the walking belt 7 to 10 cm (3 to 4 in.) off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat
until the walking belt is properly tightened.
b |
Rear Roller Adjustment Bolts |
c. If the walking belt still slows when walked on, please call our
PROBLEM: The walking belt is
SOLUTION: | a. If the walking belt is |
| |
| and UNPLUG THE POWER CORD | . If the walking |
|
| belt has shifted to the left, | use the allen wrench to |
|
| turn the left rear roller bolt clockwise 1/2 of a turn; | if | |
| the walking belt has shifted to the right, | turn the |
|
| bolt counterclockwise 1/2 of a turn. Be careful not to |
| |
| overtighten the walking belt. Plug in the power cord, |
| |
| insert the key and run the treadmill for a few minutes. |
| |
| Repeat until the walking belt is centered. |
|
a
b. If the walking belt slips when walked on, first remove
the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise,
1/4 of a turn. When the walking belt is correctly tight- ened, you should be able to lift each side of the walk-
ing belt 7 to 10 cm (3 to 4 in.) off the walking platform. Be careful to keep the walking belt centered. Plug in
the power cord, insert the key and carefully walk on the treadmill for a few minutes. Repeat until the walk- ing belt is properly tightened.
b |
PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com
CDs and videos are played
SOLUTION: | a. With the key inserted in the console, press one of the Incline buttons. | While the incline is | |
| changing, remove the key. | After a few seconds, | |
| cally rise to the maximum incline level and then return to the minimum level. This will recalibrate |
| |
| the incline. |
|
|
24