|
|
|
|
| Begin pedaling to start the program. |
| HOW TO USE A HEART RATE PROGRAM |
| 5 | ||
|
|
|
|
| Heart rate program 1 consists of 20 |
Heart Rate program 1 is designed to keep your heart |
| periods. One resistance level and one target heart | |||
| rate are programmed for each period. (Note: The | ||||
rate between 65% and 85% of your maximum heart |
| ||||
| same resistance level and/or target heart rate | ||||
rate during your workout. (Your maximum heart rate is |
| ||||
| may be programmed for two or more consecutive | ||||
estimated by subtracting your age from 220. For |
| ||||
| periods.) Heart Rate program 2 is sixty minutes | ||||
example, if you are 25 years old, your maximum heart |
| ||||
| long (you may choose to use only part of the pro- | ||||
rate is 195 beats per minute.) Heart Rate program 2 is |
| ||||
| gram). The same resistance level and target heart | ||||
designed to keep your heart rate near a target heart |
| ||||
| rate are programmed for the entire program. | ||||
rate that you select. |
| ||||
|
| ||||
Follow the steps below to use a Heart Rate program. |
| When you begin pedaling, the resistance of the | |||
| pedals will automatically change to the resistance | ||||
|
|
|
|
| |
|
| Turn on the console. |
| level programmed for the first period. | |
| 1 |
| |||
|
|
| |||
See step 1 on page 13.
2 Select one of the Heart Rate programs.
Each time the console is turned on, the manual mode will be selected. To select a Heart Rate pro- gram, press the Program button repeatedly until the number 1 or 2 appears in the small display.
3 Enter your age or a target heart rate.
If program 1 is selected, the word AGE and the current age setting will appear in the large display. If you have already entered your age, press the Enter button. If you have not entered your age, press the small + and – buttons to enter your age, and then press the Enter button.
If program 2 is selected, the letters PLS and the current target heart rate will appear in the large display. If you do not wish to change the target heart rate, press the Enter button. If you wish to change the target heart rate, press the small + and – buttons, and then press the Enter button.
4 Hold the handgrip pulse sensor.
It is not necessary to hold the handgrip pulse sensor continuously during the program. However, you should hold the handgrips frequent- ly for the program to operate properly. Each time you hold the handgrips, keep your hands on the metal contacts for at least 30 seconds.
As you pedal, the arrows in the
small display will help you to keep your heart rate near the current
target heart rate. When you hold
the handgrip pulse sensor, the console will com- pare your heart rate to the current target heart rate. If your heart rate is too far above or below the target heart rate, the number of arrows in the small display will change to prompt you to increase or decrease your pace. When the num- ber of arrows changes, change your pace until one segment of the indicator bar appears at the tip of each arrow. Important: The target pace is intended only to provide a goal. Your actual pace may be slower than the target pace, especially during the first few months of your exercise program. Make sure to pedal at a pace that is comfortable for you.
During the last three seconds of each period, a series of tones will sound and the time will flash in the large display. The resistance of the pedals will then change if a different resistance level is pro- grammed for the next period. Note: If the resis- tance level is too high or too low, you can adjust it by pressing the Resistance buttons. However, when the next period begins, the resistance will automatically change if a different resistance level is programmed for the next period.
16
