ProForm PFEL39011 user manual Assembly, Wrench A rubber mallet

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the

included allen wrenches, assembly requires a phillips screwdriver			, an adjustable
wrench	, and a rubber mallet	.

As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M10 Nylon	M10 Zinc Nylon	M10 Split	M10.3 Black	M10 Zinc
Locknut (29)–4	Locknut (88)–2	Washer (70)–4	Washer (53)–2	Washer (38)–6
			Adjustment Bolt (20)–2
M8 x 19mm Button	M10 x 27mm
Screw (22)–2	Screw (71)–3
			M10 x 78mm Button Bolt (27)–2
Frame Spacer (83)–1			M10 x 88mm Button Bolt (63)–1
M4 x 16mm		M10 x 112mm Carriage Bolt (34)–4
Screw (66)–2

5