![](/images/new-backgrounds/1183197/1831979x1.webp)
ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included allen wrenches, assembly requires a phillips screwdriver | , an adjustable | ||
wrench | , and a rubber mallet | . |
|
As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers to the quantity used in assembly. Note: Some small parts may have been
M4 x 16mm | M8 Nylon | M10 Nylon |
|
Screw | Locknut | Locknut |
|
Frame Spacer | M10 Split | M10.3 Black | M10 |
| Washer | Washer | Washer |
|
| Adjustment Bolt | |
M8 x 19mm Button | M10 x 27mm |
|
|
Screw | Screw |
|
|
|
| M10 x 78mm Button Bolt | |
M8 x 45mm Button Bolt |
|
| |
|
| M10 x 88mm Button Bolt | |
| M10 x 112mm Carriage Bolt |
| |
| 5 |
|
|