ProForm PFRX31071 DANGER: , How to Operate the Massage Chair

HOW TO PLUG IN THE POWER CORD

Your massage chair, like any other type of sophisticat-

ed electronic equipment, can be seriously damaged

by sudden voltage changes in your homeÕs power.

Voltage surges, spikes, and noise interference can

result from weather conditions or from other appli-

ances being turned on or off. To decrease the possi-

bility of your massage chair being damaged,

always use a surge suppressor with your mas-

sage chair (see drawing 1 below).

Surge suppressors are sold at most hardware stores

and department stores. Use only a single-outlet surge

suppressor that is UL 1449 listed as a transient volt-

age surge suppressor (TVSS). The surge suppressor

must have a UL suppressed voltage rating of 400

volts or less and a minimum surge dissipation of 450

joules. The surge suppressor must be electrically

rated for 120 volts AC and 15 amps.

This product must be grounded. If it should mal-

function or break down, grounding provides a path of

least resistance for electric current to reduce the risk

of electric shock. This product is equipped with a cord

having an equipment-grounding conductor and a

grounding plug. Plug the power cord into a surge

suppressor, and plug the surge suppressor into

an appropriate outlet that is properly installed and

grounded in accordance with all local codes and

ordinances.

This product is for use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus-

trated in drawing 1. Atemporary adapter that looks

like the adapter illustrated in drawing 2 may be used

to connect the surge suppressor to a 2-pole

receptacle as shown in drawing 2 if a properly

grounded outlet is not available.

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed

by a qualified electrician.

The green-colored rigid ear, lug or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet

box covers are not grounded. Contact a qualified

electrician to determine if the outlet box cover is

grounded before using an adapter.

HOW TO TURN ON THE POWER

Make sure the power

switch on the back of the

chair is in the ÒonÓ position.

Next, press the power but-

ton on the hand control; an

indicator will light. Note: If

there is a thin sheet of

plastic on the face of the

hand control, remove it.

HOW TO TURN OFF THE POWER

To turn off the power, press the power button on the

hand control. The power indicator will darken. Return

the power switch on the back of the chair to the ÒoffÓ

position.

DANGER: Improper connection

of the equipment-grounding conductor can

result in an increased risk of electric shock.

Check with a qualified electrician or service-

man if you are in doubt as to whether the

product is properly grounded. Do not modify

the plug provided with the productÑif it will

not fit the outlet, have a proper outlet

installed by a qualified electrician.

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

How to Operate the Massage Chair

Power Button