![](/images/new-backgrounds/1271336/2713369x1.webp)
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver ![](/images/new-backgrounds/1271336/2713369xi2.webp)
and wire cutters
.
Note: The underside of the treadmill walking belt is coated with
Extension Leg Screw/Handrail Screw | Latch Screw |
1.Cut the plastic tie off the side of the treadmill.
With the help of a second person, carefully raise the Uprights (11) until the treadmill is in the position shown.
1
11
2. Insert one of the Extension Legs (34) into the treadmill | 2 |
as shown. (Note: It may be helpful to tip the Uprights | |
[11] in the direction shown by the arrow as you insert | 11 |
| |
the Extension Leg.) Make sure that the Base Pad (40) is |
|
on the indicated side of the Extension Leg. Attach the |
|
Extension Leg with an Extension Leg Screw (53). Be |
|
sure to push on the head of the Extension Leg | 53 |
Screw while tightening it. | |
Attach the other Extension Leg (34) in the same way. |
|
| 34 |
| 40 |
5