8. Attach the Weight Rack (107) to the Uprights (73, 108) as |
| |
8 | ||
shown with four 3/4” Screws (2). | ||
| ||
|
| 2 | 107 |
|
| 2 |
| 73 | 108 |
|
| |
9. See step 3. Firmly tighten the 1” Bolts (63) and the 2” | 9 |
|
Bolts (114). |
| |
|
| |
Lower the Handrails (not shown) to the floor. Make sure |
| 69 |
that the Frame (86) is centered between the |
| |
Handrails. Firmly tighten the 3” Bolts (61). |
|
|
Raise the Handrails to the vertical position. Set the hand |
| 61 |
|
| |
weights (not shown) on the Weight Rack, with the lightest |
|
|
weights in the center. |
|
|
| 86 | 61 |
|
|
10.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 16). To protect the floor or carpet, place a mat under the treadmill.
9
