3.Slide a Rubber Ring (91) onto the handrail post on each Upright (11).
4.Slide the upper end of one of the Handrails (1) onto the post on one of the Uprights (11). Push the Handrail as far forward as possible. Tighten a Handrail Screw (89) into the Handrail. Next, align the lower end of the Handrail with the hole in the Upright. Tighten a Handrail Bolt (88) with a Handrail Washer (90) into the Handrail and the Upright.
Attach the other Handrail (1) as described above.
5.Attach the Storage Latch (14) to the left Upright (11) with two Latch Screws (89). Be careful not to overtighten the Latch Screws.
3 |
|
|
Post |
| |
|
| Post |
| 11 | 91 |
91 |
| |
|
| |
|
| 11 |
4 |
|
|
| 11 |
|
| 89 | 89 |
| 1 | 1 |
|
| |
|
| 11 |
|
| 90 |
88 | 90 | 88 |
| ||
5 |
|
|
|
| 11 |
|
| 89 |
| 14 |
|
6.Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 13). To protect the floor or carpet, place a mat under the treadmill.
6
