2.Insert the tab on one of the Handrail Brackets (17) into the slot in the right Upright (38). Attach the Handrail Bracket with a 3/4” Screw (5) and a Star Washer (25). Attach the other Handrail Bracket to the left Upright (not shown) in the same way.
3.Identify the Right Handrail (16), which has a large hole in the left side. Feed the Wire Harness (53) into the hole in the bottom of the Right Handrail and out of the large hole in the side. Note: It may be helpful to use needlenose pli- ers to pull the Wire Harness out of the hole.
Press a Handrail Cap (103) onto the lower end of the Right Handrail (16) as shown. Set the Right Handrail on the right Upright (38), while sliding the lower end of the Right Handrail onto the Handrail Bracket (17). Attach the Right Handrail with an Upright Bolt (44) in the upper end and a 3/4” Screw (5) and a Star Washer (25) in the lower end.
Attach the Left Handrail (4) in the same way. Note: There is not a wire harness on the left side.
4.Attach the ground wire to the small hole in the side of the Right Handrail (16) with a Silver Ground Screw (99).
2
38
Slot 
| 17 |
|
| 5 |
|
| 25 |
|
3 |
|
|
44 |
|
|
| 53 | Hole |
4 |
|
|
| 44 | Hole |
|
| |
| 16 |
|
|
| 38 |
25 |
|
|
5 | 103 |
|
|
| |
| 25 |
|
| 5 | 17 |
4 |
|
|
Ground
Wire
99
16
7
