Mode Indicator

To stop the walking belt, press the Stop button. The elapsed time will begin to flash in the Time/ Distance display.

Note: During the first few minutes that the treadmill is used, inspect the alignment of the walking belt, and align it if necessary (see page 14).

3 Change the incline of the treadmill as desired.

To change the incline of the treadmill, press the Incline buttons until the desired incline level is reached.

4 Follow your progress with the three displays. Time/Distance

display—This display shows the elapsed time and the distance that you have walked or run.

The display will change from one number to the

other every few seconds, as shown by the mode indicators. When the Stop button is pressed, the elapsed time will flash in the display.

Fat Calories/Calories

display—This display shows the approximate numbers of fat calories and calories you have

burned (see FAT BURN-

ING on page 15). The display will change from one number to the other every few seconds, as shown by the mode indicators.

Speed display—This display shows the speed of the walking belt.

Note: The console can

display speed and dis- tance in either miles or kilometers. The letters MPH or KPH in the

Speed display will show

which unit of measurement is selected. To change the unit of measurement, hold down the Stop but- ton, insert the key into the console, and continue to hold the Stop button for a moment. An “E” for English miles or an “M” for metric kilometers will appear in the Fat Calories/Calories display. Press the Speed button to change the unit of measure-

ment. When the desired unit of measurement is selected, remove the key and then reinsert it.

To reset the displays, press the Stop button, re- move the key, and then reinsert the key.

5 Whenkey. you are finished exercising, remove the

Step onto the foot rails, press the Stop button, and remove the key from the console. Keep the key in a secure place.

WARNING: Removing the key does not cut off power to the incline sys- tem. To prevent movement of the treadmill and possible injury, unplug the power cord when the treadmill is not in use.

HOW TO USE THE UPPER BODY ARMS

As you walk on the treadmill, hold either the handrails or the upper body arms. To exercise your arms, shoul- ders, and back for a total body workout, move the upper body arms forward and back as you walk on the treadmill.

Upper

Body

Arms

Resistance

Knobs

To vary the intensity of your upper body exercise, the resistance of the upper body arms can be adjusted. To increase the resistance, turn the resistance knobs clockwise; to decrease the resistance, turn the knobs counterclockwise.

10

Page 10
Image 10
ProForm PFTL39920 Change the incline of the treadmill as desired, Fat Calories/Calories, HOW to USE the Upper Body Arms