ProForm PFTL413040, 445i user manual Assembly, Make sure that the power cord is not plugged

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench

and 90° screwdriver and your own Phillips screwdriver and needlenose pliers .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

For help identifying the assembly hardware, see the drawings below. Note: The assembly hardware and other small parts are packaged in separate part bags.

Weight Rack Bolt (121)–4	1/2” Silver Screw (107)–1	3/4” Screw (39)–6
Wheel Bolt (86)–2		1” Tek Screw (115)–4
	Nut (122)–4
2 1/2” Bolt (56)–4
2 3/4” Bolt (47)–4	Star Washer (81)–4	Washer (29)–4
4” Bolt (120)–2

1.Make sure that the power cord is not plugged in.

With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (12) so that the treadmill will be more stable. Do not fully fold the treadmill until it is completely assembled.

Attach the four Base Pads (97) to the bottom of the Base (82) with four 1” Tek Screws (115) (only two Base Pads and 1” Tek Screws are shown.

1	115
	97
	97
	82
	12
	115

6