2. Identify the Right Upright (10). Note: The Left Upright (9)

has the Latch Housing (77, see step 3) attached to it.

Have a second person hold the Right Upright (10) near the

Base (82) as shown. Orient the Right Upright so that it is

angled forward (see step 3). Feed the Upright Wire

Harness (17) into the lower end of the Right Upright and

out of the upper end.

Next, hold the Right Upright (10) against the Base (82). Be

careful not to pinch the wires. Insert two 2 3/4” Bolts

(47), with two Washers (29) and two Star Washers (81),

into the Base, and loosely thread the Bolts into the lower

end of the Right Upright (10).

Attach a Wheel (95) to the Base (82) with a Wheel Bolt (86).

Do not overtighten the Wheel Bolt; the Wheel must be

able to turn freely.

With the help of a second person, tip the treadmill onto its

right side. Be careful not to damage the Upright Wire

Harness (17). Have a second person hold the Left Upright

(9) near the Base (82). Orient the Left Upright so that it is

angled forward (see step 3). Attach the Left Upright and

the other Wheel (not shown) as described above. Note:

There are no wires in the Left Upright.

3. With the help of a second person, set the treadmill on the

floor with the Left and Right Uprights (9, 10) vertical.

Identify the Right Handrail (124), which has a large hole

in the left side. Feed the Wire Harness (17) up through

the hole in the bottom of the Right Handrail and out of

the large hole in the left side. Note: It may be helpful to

use needlenose pliers to pull the Wire Harness out of the

2

 

 

 

 

10

 

17

 

 

 

86

47

81

 

29

95

 

 

 

 

9

 

82

 

 

81

 

47

 

 

 

29

 

3

56

 

 

 

 

 

17

123

56

large hole.

Set the Right Handrail (124) on the Right Upright (10).

9

77

Large

Hole

Finger tighten a 4” Bolt (120) through the Right Upright into

the lower end of the Right Handrail. Attach the upper end

of the Right Handrail with a 2 1/2” Bolt (56). Do not

tighten the Bolts yet.

Attach the Left Handrail (123) as described above. Note:

There is not a wire in the Left Handrail.

124

120

10

120

7

Page 7
Image 7
ProForm 445i Careful not to pinch the wires. Insert two 2 3/4 Bolts, Do not overtighten the Wheel Bolt the Wheel must be