ProForm PFTL49612.0

9. Set the console assembly face down on a soft

surface to avoid scratching the console

assembly.

Remove the screws (A) and the two ties (B)

attaching the Crossbar (104). Next, lift off the

Crossbar. Discard the screws and the ties.

104

Console

Assembly

8. Identify the Right Upright Cover (86) and the

Right Handrail (83). Slide the Right Upright

Cover onto the Right Upright (85). Remove the

tie from the bracket on the Right Handrail. If

necessary, press the 5/16" Cage Nut (38) back

into place.

Hold the Right Handrail (83) near the Right

Upright (85). Insert the Upright Wire (87) through

the bracket on the bottom of the Right Handrail,

and pull the Upright Wire out of the end of the

Right Handrail.

Attach the Right Handrail (83) to the Right

Upright (85) with two 5/16" x 1" Screws (3) and a

5/16" x 1" Bolt (4) with a 5/16" Star Washer (13);

do not tighten the Screws and the Bolt yet.

Attach the Left Upright Cover (not shown)

and the Left Handrail (not shown) in the

same way. Note: There is no wire on the left

side.

Bracket