![](/images/new-backgrounds/1293002/29300217x1.webp)
3 Follow your progress with the four displays.
TIME
DISTANCE display— This display shows the distance that you have walked or run, in miles.
SPEED
CALORIES/FAT
CALORIES/PULSE
ries and fat calories you have burned.
(See FAT BURNING on page 14.) Every seven seconds, the display will change from one number to the other, as indicated by the mode arrows. This display also shows your pulse when the pulse sen- sor is used (see step 4).
The displays can be reset, if desired, by pressing the ON/RESET button.
4 Measure your pulse, if desired.
pulse will not be detected. Next, raise your thumb slightly until the
If the displayed pulse appears to be too high or too low, or if your pulse is not displayed, lift your thumb off the sensor and allow the display to reset. Press down again on the sensor as described above. Make sure that your thumb is positioned as shown, and that you are applying the proper amount of pressure to the pulse sensor. Try the sensor several times until you become familiar with it. Remember to stand still while measuring your pulse.
5 Adjust the incline of the treadmill as desired.
To change the incline, press the top or bottom of the incline con- trol until the desired incline level is reached.
6 Turn off the power.
To turn off the power, simply wait for about four minutes. If the walking belt is stationary and the console buttons are not pressed for four minutes, the power will turn off automatically.
To measure your pulse, stand on the foot rails and place your thumb on the pulse sensor as shown. The pulse sensor is pressure ac-
Pulse Sensor |
Pulse Indicator |
9