AcuteB Head
SAFETY PRECAUTIONS!
Read and follow all safety instructions below carefully to avoid injuries or damages! Make sure that this user manual always accompanies equipment!
Profoto products are intended for professional use!
Generator, lamp heads and other parts are only intended for indoor photographic use.
Do not place or use the equipment where it can be exposed to moisture,for instance thorough condensation,extreme electromagnetic fields or in areas with flammable gases or dust!
Do not expose the equipment to dripping or splashing Do not place objects filled with liquids on the equipment.
Do not store the lamp head close or below the freezing point,which can lead to loss of capacity and risk of condensation when used in a warmer surrounding immediately.
Do not connect lamp heads to other brands!
Equipment must only be serviced or repaired by authorised and competent service personnel!
Changes or modifications not expressly approved by the party responsible for compliance Profoto could void the user’s authority to operate the equipment.
WARNING – Electrical Shock Hazard – High Voltage!
Connect generator to grounded mains outlet! Only use Profoto extension cables!
Do not open or disassemble generator or lamp head! Equipment operates with high voltage.
Do not touch modeling lamp or flash tube when mounting umbrella metal shaft in its reflector hole, risk of contact with live electrical socket!
Disconnect lamp cable between generator and lamp when changing modeling lamp or flash tube!
CAUTION – Burn Hazard – Hot Parts!
Donottouchhotpartswithbarefingers!Modelinglamps,flashtubesandcertainmetalpartsemitstrongheatwhenused! Do not point modeling lamps or flash tubes too close to persons. Light components may on rare occasions explode and throw out hot particles!
Make sure that rated voltage for modeling lamp corresponds with technical data of user guide regarding power supply!
NOTICE – Equipment Overheating Risk
Remove transport cap from lamp head before use!
Do not obstruct ventilation by placing filters, diffusing materials, etc. directly over glass cover modeling lamp or flash tube!
Final disposal
Equipment contains electrical and electronic components that are harmful to the environment. Equipment may be returned to Profoto distributors free of charge for recycling according to WEEE.
Follow local legal requirements for separate disposal of waste,for instanceWEEE directive for electrical and electronic equipment on the European market, when product life has ended!
AcuteB Head
For more information, visit www.profoto.com | For more information, visit www.profoto.com |
