Proline PLS1576, PLS1570 Island Hood Installation, Mark ceiling, Install ceiling bracket

8  PROLINE RANGE HOODS

ISLAND HOOD INSTALLATION

STEP 1 Mark ceiling

♦♦ find and mark the center point directly above your cooktop

♦♦ place the ceiling bracket on the ceiling around the center point. (Make sure it is square with your cooktop).

♦♦ trace the outline of the ceiling bracket onto the ceiling

♦♦ trace a circle where the ducting will go

♦♦ mark the 4 corners where you will drill holes

STEP 2 Install ceiling bracket

*ceiling bracket must be mounted to a weight-bearing ceiling able to support at least twice the weight of the hood.*

♦♦ drill holes into 4 ceiling marks from Step 1.

♦♦ cut out a hole in the ceiling where the ducting will go (if you are venting to the outside of your home)

♦♦ place chimney bracket against ceiling and screw into place

♦♦ drop the ducting and electrical work through the ceiling (if you are venting to the outside of your home)

STEP 3 Install support brackets

♦♦ place brackets vertically inside the 4 corners of the ceiling bracket

♦♦ extend the brackets to the appropri- ate length. (the bottom of the hood should be 28”-36” above the cooktop)

♦♦ screw all support brackets to the ceil- ing mounting bracket