ProMaster 15-45X65 manual Specifications, User Warning

3.Do not drop the spotting scope or subject it to strong vibration, impact or pressure.

4.Never expose the spotting scope to high temperatures (over 60°C or 140°F). Avoid leaving the spotting scope for an extended period of time in a hot humid place such as in a car parked in the sun or near any high heat source as this could cause the spotting scope to become deformed.

5.Do not use the spotting scope under the water. While your spotting scope is waterproof and can be submersed, submersion to a depth greater than the specification or longer than the specification will cause permanent damage and will void the warranty. When splashed with salt water, wipe the scope with a clean cloth moistened with fresh water.

6.Your spotting scope is waterproof and weather-resistant. After use, any moisture on your scope should be wiped away with a dry cloth. Do not wipe your scope with thinner, alcohol, benzene nor any other chemical. In the case of dust or water on the lens, use a blower like the PROMASTER Hurricane Blower or a lens cleaning cloth like the PROMASTER SoftClean cloth. In the case of any oily substance like fingerprints, a small amount of high quality lens cleaning solution like PROMASTER OpticClean fluid can be used on a high-grade lens tissue like PROMASTER OpticClean tissue to gently remove the substance.\

7.Your spotting scope should always be stored in a clean, dry, well-ventilated environment. Never store it with mothballs or in an environment where chemicals are handled.

USER WARNING

1.NEVER look at the sun with the spotting scope. This will cause serious damage to the retina or total loss of eyesight.

2.Do not leave the spotting scope under direct sunlight. Sun rays passing through the scope will be greatly intensified and a fire may occur if the rays are focused on any flammable material.

Specifications :

Type	Porro-prism angle type
Body construction	Magnesium alloy body
Magnification	15x – 45x
Objective lens	65mm diameter Extra Low Dispersion (ED) glass
Lens coating	Fully broadband multi-coated on all optical surfaces
First objective lens coating	Repellamax™ element repellant coating
Field of view @ 1000m	57m – 27m
@ 1000yds	171ft – 81ft
Exit pupil aperture	4.3mm – 1.4mm
Eye Relief	16mm – 19mm
Focus range	3m to infinity
	3.3yds to infinity
Waterproof (without eyepiece)	1/2m depth for 2 min
Weatherproof	Nitrogen filled fog proof
Body length (Without Eyepiece	H-24.3 x 300mm / 9.6 x 11.8inch.
Body Weight	1.26kg. / 2.78 lbs
Accessories	Objective lens cap
	Body fit vinyl pouch
	SLR camera T-mount adapter