User’s Manual | Proton Stick V2 Portable USB Flash Disk |
Driver Installation
A. Installation Procedure for Win 98 / 98se
1.Do NOT plug in the Proton Stick V2.
2.Insert CD driver disc and run “X:\driver\Setup.exe”. (Letter “X” refers to the CDROM drive location.)
3.Click “Start” button.
4.Plug in Proton Stick V2 into the computer USB port and Windows will install the driver automatically.
5.Afterwards, in “MY COMPUTER” you will find a new icon “REMOVABLE DISK”. This is the location of Proton Stick V2.
6.Now, you are able to access all features that provided by Proton Stick V2.
** Please also read “UTILITIES” in this installation quick reference.
B. Installation Procedure for Win Me / Win 2000 / Win XP
There is Proton Stick V2 driver support in Win Me / Win 2000 / Win XP. After you plug in Proton Stick V2 Windows will automatically install the driver. Just follow the simple installation procedure, and finally, in “MY COMPUTER” you will find a new icon “REMOVABLE DISK”.
For using security and partition functions, etc, ‘Manager’ application should be installed. Insert CD driver disc and run “X:\manager.exe”. (Letter “X” refers to the CDROM drive location.)
**Please also read “UTILITIES” in this installation quick reference.
**To “Uninstall” Proton Stick V2, plug off from the USB port.
C. Linux
For Linux, you can use the following instructions to mount the USB disk on.
1.Execute cd /etc/sysconfig (cat /etc/sysconfig/hwconf more)
2.Check the device information in hwconf and write down the mount point (e.g. /dev/sda)
3.Make a directory in /mnt (e.g. mkdir /mnt/flashdisk)
4.Mount the device on (e.g. mount /dev/sda/mnt/flashdisk if mount point is /dev/sda)
3
