Installation

Method 2: Digital (DVI) Connection

1Turn off the computer and unplug the power cable.

2Connect the signal cable (DVI-D) to the DVI port on the back of the computer.

3Connect the audio cable to the line-in port on the back of the computer.

4If you would like to listen to PC audio with a headphone, connect the audio out port to the headphone.

5Connect the DC plug of the AC-DC adapter to the DC 24V port at the rear of the monitor. Connect the power cord to the AC-DC adapter and wall outlet.

6Press the button, located on the bottom side of the main unit to turn the monitor on, then turn the computer on. If the monitor displays an image, the monitor is successfully installed. If no image is displayed, check all connections.

16

Xerox© LCD Monitor User’s Manual

Page 17
Image 17
Proview XM9-23w manual Method 2 Digital DVI Connection