Mount Unit to Pole | Proxim 5012-SUR manual

Step 3: Mount Unit to Pole

Mount the 5012-SUR to a pole as follows:

1.Using a screwdriver, turn the screw on the band clamp counter-clockwise until the clamp opens.

2.Place the back of the 5012-SUR against the pole such that the pole fits into the curved portion of the unit.

3.With the 5012-SUR aimed in the direction of the BSU, slide the flat end of the band clamp around the pole and through the top opening in the 5012-

SUR unit, threading the flat end of the band clamp into the metal catch at the other end.

4.Using a 5/16” nutdriver or a screwdriver, turn the screw on the band clamp clockwise until it is tight enough to hold the unit in place

Note:

Do not fully tighten band clamps; you must first ensure a functional link to the BSU (see Step 4: View LEDs/Adjust Mounting).

Page 10