Tsunami MP.11a Antenna Installation Guide

Note: Previously marketed Tsunami outdoor antenna systems in FCC regulated countries (such as the USA and Canada) were shipped with a different cabling system, identified by reverse polarity-N connectors (depicted in the following table).

Table 9. Reverse Polarity-N Cabling Diagram

 

 

 

 

 

 

 

 

Cabling Component

 

Reverse Polarity-N Cabling Systems

 

 

 

 

 

 

 

 

 

a

Pigtail attached to MP.11

 

1

Proprietary connector

 

 

 

 

 

2

Reverse polarity-N male

 

 

 

 

 

 

 

 

b

Surge arrestor

 

Reverse polarity-N female on both ends

 

 

 

 

 

 

 

 

c

Low-loss cable

 

Reverse Polarity-N male on both ends

 

 

 

 

 

 

 

 

d

Outdoor antenna

 

Reverse polarity-N female

 

 

 

 

 

 

 

 

Note that the gender of the connector is not determined by the connector’s thread, but by its center pin; a solid center pin = male, a hollow pin = female.

DANGER!

Outdoor antennas and antenna cables are electrical conductors. Transients or electrostatic discharges that may occur at the antenna (for example a lightning strike during thunderstorms) may damage your electronic equipment and cause personal injury or death to persons touching the exposed metal connectors of the antenna cable.

To avoid damage and personal injury, the entire antenna cabling system must be grounded at all times.

When installing, disconnecting or replacing one of the cabling components, you must ensure at all times that each exposed metal connectors of the antenna cabling system will be grounded locally during the work.

For example when mounting or replacing the surge arrestor:

1.First connect each of the connectors of the low-loss antenna cables to the grounding system.

2.Next connect the cable connector to the grounding system.

3.Finally connect the surge arrestor to the grounding system.

Before you proceed, verify that each of the items is properly grounded and that the ground will not interrupted when disconnecting one of the antenna system components.

Appendix B. Antenna Cabling System

35

CPN 65756B

Issue Date: August 2003

Page 35
Image 35
Proxim CPN 65756B manual Reverse Polarity-N Cabling Diagram, Cabling Component Reverse Polarity-N Cabling Systems

CPN 65756B specifications

Proxim CPN 65756B is a versatile and cutting-edge wireless connectivity solution designed to meet the increasing demands for robust and high-performance communication in various industries. This access point is engineered to provide reliable connectivity, high throughput, and enhanced network security, making it suitable for various applications including enterprise environments, public venues, and industrial settings.

One of the standout features of the Proxim CPN 65756B is its dual-band capability. It operates on both the 2.4 GHz and 5 GHz frequency bands, allowing for flexible deployment based on specific network requirements. This dual-band functionality enables users to take advantage of faster data rates and reduced interference on the 5 GHz band while still accommodating legacy devices that operate on the 2.4 GHz band.

The CPN 65756B supports advanced Wi-Fi standards, including IEEE 802.11ac, which significantly boosts wireless network performance with high-speed data transfers. This access point can deliver up to 1.75 Gbps of aggregate throughput, ensuring that users experience minimal lag and quick response times for bandwidth-intensive applications such as video conferencing and high-definition streaming.

Equipped with a range of technologies, the Proxim CPN 65756B provides seamless connectivity to large numbers of users. Its Multi-User MIMO (MU-MIMO) capability allows multiple devices to be served simultaneously, enhancing overall network efficiency and optimizing user experiences. This feature is particularly beneficial in environments with high user density, reducing congestion and ensuring that all users maintain reliable connections.

Security is a top priority for deployments with the CPN 65756B. It supports WPA3 and advanced encryption protocols to protect sensitive data being transmitted over the network. Additionally, it includes built-in features for guest access and robust authentication methods, further enhancing its security profile.

The Proxim CPN 65756B also emphasizes ease of management and deployment. It is compatible with Proxim's cloud-based management platforms, allowing administrators to monitor network performance, troubleshoot issues, and configure settings remotely. This simplifies maintenance and increases operational efficiency, particularly for large-scale installations.

In summary, the Proxim CPN 65756B represents a powerful solution for organizations seeking to improve their wireless communications infrastructure. With its advanced features, dual-band operation, high throughput, and strong security measures, it stands out as a reliable choice for enhancing connectivity in a myriad of environments.