®
Getting Started
Owner’s Reference GCHA Headphone Amplifier
Location
Isolation
Power Cables
Use a Power Plant
Audio interconnects
USB cable
Once your new GCHA is unpacked, you’ll need to fi nd a convenient place to set it.
There are several ways to mount the GCHA: on a shelf next to the preamplifi er, CD or DVD player, or on a desk or table near your computer.
The GCHA can benefi t from aftermarket isolation devices such as cones, spikes and Sorbothane pads.
Once you have chosen the location for the GCHA you can use the supplied AC power cord to connect it to the AC wall receptacle to get started, or you can use an aftermarket power cord and receptacle.
We strongly recommend the use of a PS Audio xStream Power™ AC cable and a PS Power Port™ AC receptacle to feed the GCHA power. While the supplied power cable is adequate for the task of setup it is not going to provide the best performance. Choosing any xStream Power cable will make a signifi cant performance improvement over the stock power cable. An xStream Plus would be our recommendation.
It is further recommended that you power the GCHA with a PS Audio Power Plant if possible, or a
Connections from the analog audio source should be through high quality audio interconnects with proper shielding. Using inexpensive,
Connections from the computer to the USB input of the GCHA should use a high quality, properly shielded
4826 Sterling Drive, Boulder, CO 80301 |
|
PH: 720.406.8946 service@psaudio.com www.psaudio.com | Getting Started 1 |
©2005 PS Audio International Inc. All rights reserved.