use a PS Audio xStream Power cable. To provide the best electrical connection the Juice Bar should be plugged into a PS Audio Power Port duplex outlet.

Confirm that the blue indicator light is on. This light indicates the presence of live AC power. If the blue indicator light is not illumi- nating then there is no power present. Verify the power source is active or the power source is operational and providing power.

If the blue LED is lit, the connected equip- ment is ready to use.

Wall or ceiling mounting instructions (Optional)

Two #8 or #10 screws are required. Make sure the mounting surface is strong enough to support the weight of the Juice Bar and connected power cables, i.e., wood or ply- wood, etc. Alternatively, wall anchors can be used if the surface is not supportive enough.

Hold the unit in the desired mounting posi- tion. Mark the location of the screws with a pencil. Pre-drill the holes at that location.

Insert the screws through the holes at each end of the Juice Bar. While holding the Juice Bar in place tighten the screws until they are snug. Do not overtighten the screws.

Protection Features

Since The Juice Bar is designed for maxi- mum performance and unrestricted current flow it does not provide any protection as a lightning arrestor, surge suppressor or spike protector.

To properly protect connected equipment, plug the Juice Bar into a product that pro- vides these features such as a PS Audio Power Plant, Ultimate Outlet or any other similarly designed device. This will not only extend the number of available outlets but extend the protection and cleansing benefits as well.

If the Juice Bar is not plugged into a device with these features the connected equip- ment is will not be protected.

Specifications

Height

- 1.75 in

Width

- 2.75 in

Length

- 16.25 in

Weight

- 3 lbs

Internal wiring

- 14 ga

Power inlet

- 15 amp IEC

Warranty and Service

Inside the U.S. and Canada

PS Audio’s warranty is 3 years parts and labor, from the date of original purchase. The warranty follows the product itself regardless of ownership, new or used.

Outside the U.S. and Canada

PS Audio has authorized distribution in many countries of the world. In each country, the authorized importing retailer or distributor has accepted the responsibility for warranty of products sold by that retailer or distributor. Warranty service should normally be obtained from the importing retailer or distributor from whom you purchased the product. In the unlikely event of service required beyond the capability of the importer, PS Audio will fulfill the conditions of the warranty. Such product must be returned at the owner’s expense to the PS Audio factory. Contact your PS Audio distributor or the PS Audio customer service department for more information.

Service issues

Should your unit ever require service or if you have any technical questions about the Juice Bar, ether contact your dealer (PS Audio if purchased direct) or your PS Audio distributor. No equipment will be received at our service facilities without an attached RA number.

If purchased through an authorized PS Audio dealer or distributor, the RA number must be obtained by the dealer or distributor. If the product was purchased from PS Audio direct, this can easily be obtained by contacting PS Audio at:

E-mail - service@psaudio.com Phone - 720.406.8946

Fax - 720.406.8967

3

Page 3
Image 3
PS Audio Juice Bar installation instructions Protection Features, Specifications, Warranty and Service