TubeWave uses the same pseudorandom generation of frequencies as MultiWave2 waveform, however it generates more tube- friendly frequencies.

[P-1] MultiWave1

MultiWave1 is a single 60Hz sine wave with a minute amount of 3rd Harmonic sine waves mixed together to form a single partial square MultiWave. This is an improved version of PS2 from the original MultiWave™ series.

The partial square wave setting improves the power supply’s ability to charge the capacitors in equipment by extending the length of time available to "top off" the capacitors' voltage. Use this setting to enhance the performance of both source and power equipment.

[P-2] MultiWave2

MultiWave2 is a 60Hz sine wave that incorporates a pseudorandom collection of frequencies which are dithered from 55-65Hz.

Using this slightly random frequency deviation is similar to adding dither on a digital audio source. Power supply dithering can lower the perceived noise floor and help remove apparent glare on the audio signal.

[P-3] MultiWave3

MultiWave3 is a combination of Multiwave1 with a slight degree of 3rd harmonic addition (MultiWave1).

Try this setting and see how the audio sounds and the video looks. All systems can respond differently to each MultiWave pattern.

[P-4] MultiWave4

MultiWave4 is full combination of MultiWave1 and MultiWave2. It generates a pseudorandom collection of frequencies, however instead of generating sine waves it generates the same waveform as MultiWave1.

Again, try these setting on your system to see which one has the highest perceived benefit in terms of performance.

Warranty inside the U.S. and

Canada

PS Audio’s warranty is 3 years parts and labor, from the date of original purchase. This means that we warranty the product itself regardless of ownership, new or used.

Warranty outside the U.S. and

Canada

PS Audio has authorized distribution in many countries of the world. In each country, the authorized importing retailer or distributor has accepted the responsibility for warranty of products sold by that retailer or distributor. Warranty service should normally be obtained from the importing retailer or distributor from whom you purchased the product. In the unlikely event of service required beyond the capability of the importer, PS Audio will fulfill the conditions of the warranty. Such product must be returned at the owner’s expense to the PS Audio factory. Contact your PS Audio distributor or the PS Audio customer service department for more information.

Service issues

Should your unit ever require service or if you have any technical questions about the MultiWave II++ kit, you must either contact your dealer (PS Audio if purchased direct) or your PS Audio distributor. No equipment will be received at our service facilities without an attached RA number.

If purchased through an authorized PS Audio dealer or distributor, the RA number must be obtained by the dealer or distributor. If the product was purchased from PS Audio direct, this can easily be obtained by contacting PS Audio at:

E-mail - service@psaudio.com

Phone - 720.406.8946

Fax - 720.406.8967

http://www.psaudio.com

8

Page 4 Page 5
Page 5
Image 5
PS Audio P300, P1200, P600 warranty Warranty inside the U.S. Canada, Warranty outside the U.S. Canada, Service issues
Page 4 Page 5

P1200, P600, P300 specifications

PS Audio is well-known for its high-quality audio equipment, and the P1200, P300, and P600 power regenerators are prime examples of the company's commitment to delivering clean, reliable power for audiophiles. Each model features unique characteristics and technologies designed to enhance audio quality, making them essential components for high-end audio systems.

Starting with the PS Audio P1200, this power regenerator is aimed at providing a stable, noise-free power source. The P1200 utilizes PS Audio's patented Power Factor Correction technology, which ensures the connected components receive the right voltage and current to perform at their best. It delivers a pure sine wave output, eliminating the distortion that can occur with typical AC power sources. The P1200 can output up to 1200 watts and features multiple outlets, allowing users to connect several devices while maintaining optimal power supply.

Next is the PS Audio P300, a versatile power regenerator recognized for its ability to balance power demands based on the connected components. It incorporates a Digital Signal Processor (DSP) that continuously monitors and adjusts the output waveform to maintain the integrity of the audio signal. The P300 also features a custom-designed transformer capable of handling higher current demands, making it suitable for amplifiers and other power-hungry devices. With selectable output voltages, the P300 can adapt to various equipment needs, ensuring maximum performance.

Finally, the PS Audio P600 takes power regeneration to another level. It is equipped with advanced Power Plant technology, which not only regenerates power but also incorporates active and reactive load management. This allows the P600 to deliver enhanced dynamic range and richest detail by prioritizing power delivery where it is needed most. With its 600-watt output and a robust set of connections, the P600 is perfect for providing pristine power to a range of audio sources and amplifiers.

Each of these power regenerators from PS Audio showcases cutting-edge design and performance, providing audiophiles with improved sound quality, reduced noise, and reliable operation. By mitigating the detrimental effects of electrical irregularities, the P1200, P300, and P600 empower users to experience their audio systems at their fullest potential. Whether for a modest setup or a sophisticated high-end audio environment, these regenerators elevate the listening experience with unparalleled clarity and depth.
Top Page Image Contents