LED |
|
| DURATION | COMMENT | ||
INDICATION |
|
| ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Audible low tone 1 second. | Serves notice that a fatal FRU failure | |||
Field Replace- |
| has been detected. If a low tone is | ||||
| Alternating Green/Yellow LED | |||||
able Unit (FRU) |
| heard, but continuous flashing is not | ||||
| flashes continuously. | |||||
Warning (Error |
| observed, the scanner can still func- | ||||
|
|
|
|
| ||
Mode) |
|
|
|
|
| tion in a limited capacity. Call systems |
|
|
|
|
| ||
|
|
|
|
|
| support for service in either case. |
|
|
|
|
|
|
|
|
| Green LED flashes a coded | Occurs ONLY upon Volume/Tone but- | |||
|
| sequence in concert with the | ||||
|
| ton push following a FRU warning. | ||||
FRU Indication |
| speaker. | ||||
| Enables service technicians to identify | |||||
|
|
|
|
|
| |
|
|
|
|
|
| FRU failures. |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
a.Certain functions of the Green and Yellow LEDs are selectable to be enabled or disabled. Your scanner may not be programmed to display all indications.
Volume/Tone Push Button
The Volume/Tone Push Button also performs multiple functions depending upon the duration of time it is pressed:
Table 3. Volume/Tone Push Button Functions
PRESS | FUNCTION | COMMENT | |
DURATION | |||
|
| ||
|
|
| |
|
|
| |
|
| Alternatively, the scanner can be awakened | |
Momentary | Wakes scanner from | by: | |
(when scanner is | - Moving an object through the scan zone. | ||
Sleep Mode | |||
asleep) | - A weight change on the scale. | ||
| |||
|
| - Scanning with an attached auxiliary scanner. | |
|
|
| |
|
| Press the push button momentarily to | |
Momentary |
| increase speaker volume. When the loudest | |
| volume is reached, a repeated press of the | ||
(when scanner is | Increments volume | ||
push button cycles volume back to the lowest | |||
awake) |
| ||
| setting, then volume increases on subsequent | ||
|
| ||
|
| press(es). Five volume levels are available. | |
|
|
|
4 | Magellan® 8100/8200 |
