LOW NOx MAXIM • PACKAGED GAS WATER HEATER
POLYSHIELD® POLYMER-LINED STORAGE TANK
125 GALLON TANK SERIES
| MODEL NUMBER | 20 P | 27 P | 40 P |
| GPH Recovery at 40° to 120° F | 245 | 330 | 490 |
| GPH Recovery at 40° to 140° F | 195 | 260 | 390 |
| Input Btu/h | 199,000 | 270,000 | 399,000 |
| Minimum gas inlet pressure – " W.C. | 5.5 | 5.5 | 5.5 |
A | Cold Inlet - NPT | 2 | 2 | 2 |
B | Hot Outlet - NPT | 2 | 2 | 2 |
C | Drain - NPT | 1 | 1 | 1 |
D | I - Beam Skids | 3 X | 3 x | 3 x |
E | Overall Depth | 45 | 45 | 45 |
F | Overall Height | 75 | 75 | 82 |
G | Flue Outlet Diameter | 5 | 6 | 7 |
H | Gas Inlet - NPT | 1/2 | 3/4 | 3/4 |
J | Motor HP 120 V, 1Ø, 60 Hz. | 1/6 | 1/6 | 1/6 |
| Motor Amps | 1.75 | 1.75 | 1.75 |
L | Height to Outlet | 65 | 65 | 73 |
M | Height to Inlet | 28 | 28 | 36 |
| Approx. Shipping Weight - lbs | 1020 | 1070 | 1130 |
Recoveries based on 82% thermal efficiency. ASHRAE 90.1 compliant. Dimensions are in inches unless otherwise specified.
For standard and optional equipment, see Form # PV6377.
1.Control Enclosure
2.ASME Temperature & Pressure Relief Valve
3.3” NPT Handhole
STANDARD GAS PRESSURE REQUIREMENTS:
SEE TABLE FOR MINIMUM PRESSURE BY MODEL NUMBER.
MAXIMUM STATIC PRESSURE: 9" W.C.
FOR GAS PRESSURES OUTSIDE OF THIS RANGE,
CONTACT YOUR PVI REPRESENTATIVE.
STANDARD ELECTRICAL REQUIREMENTS:
CONTROL VOLTAGE: 120V, 1Ø, 60 HZ., 2 AMPS
VENTING REQUIREMENTS:
TYPE B VENTING.
THE ENTIRE VENT SYSTEM SHOULD NEVER BE SIZED BASED UPON THE
VENT CONNECTION DIAMETER EXCLUSIVELY.
FOR PROPER VENT SIZING, CONSULT THE NATIONAL FUEL GAS CODE
UNDER
PVI RESERVES THE RIGHT TO CHANGE THE DESIGN AND SPECIFICATION WITHOUT NOTICE.
Product is patented in the U.S., Canada, and Mexico.
| PVI INDUSTRIES, LLC |
PV 6378 02/05 | FORT WORTH, TEXAS 76111 |
(800) |
