LOW NOx TURBOPOWER® • PACKAGED WATER HEATER
NICKELSHIELD®
TANK SERIES 750 GALLONS VERTICAL
MODEL | Recovery gph c | INPUT | Min. Inlet |
|
| Dimensions (inches) | Blower | Shipping | ||||||
Flow Gas | SCAQMD Energy |
| Motor | Weight | ||||||||||
|
|
|
|
|
|
| ||||||||
NUMBER | 40° - 120°F | 40° - 140°F | Btu/h | Pressure | Model No. | A | B | C | J d | HP |
| Amps | lbs | |
|
| " W.C. e |
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
500 N | 500 | 400 | 399,000 | 4.5 | 4TPL | 399 MBtu/h | 28 | 5 | 3/4 | 16 | 1/3 |
| 8 | 2660 |
cRecoveries based on 83% thermal efficiency. ASHRAE 90.1 compliant for efficiency and standby loss. d “J” dimension is for the burner housing only – gas train may exceed this dimension.
e Standard gas train.
* The information presented is for natural gas 0.6 S.G. Dimensions are in inches unless otherwise specified. For standard and optional equipment, see form #PV6540.
STANDARD GAS PRESSURE REQUIREMENTS:
SEE TABLE FOR MINIMUM PRESSURE BY MODEL NUMBER.
MAXIMUM STATIC INLET GAS PRESSURE IS 14" W.C.
FOR GAS PRESSURES OUTSIDE OF THIS RANGE, CONTACT YOUR PVI REPRESENTATIVE.
VENTING REQUIREMENTS:
TYPE B VENTING.
ENTIRE VENT SYSTEM SHOULD NEVER BE SIZED BASED UPON THE VENT CONNECTION DIAMETER EXCLUSIVELY. CHECK NATIONAL FUEL GAS CODE UNDER "FAN ASSISTED."
STANDARD ELECTRICAL REQUIREMENTS:
CONTROL VOLTAGE: 120V, 1Ø, 60 HZ., 2 AMPS.
MOTOR VOLTAGE: 1/3 HP ARE 120V, 1Ø, 60 HZ.
208V, 230V AND 460V MOTORS ARE AVAILABLE BUT WILL REQUIRE A SEPARATE 120V/2 amps CONTROL CIRCUIT OR AN OPTIONAL CONTROL CIRCUIT TRANSFORMER.
PVI RESERVES THE RIGHT TO CHANGE THE DESIGN AND SPECIFICATION WITHOUT NOTICE.
Product is patented in the U.S., Canada, and Mexico.
| PVI INDUSTRIES, LLC |
PV 6549 11/07 | FORT WORTH, TEXAS 76111 |
(800) |