SPECIFICATION FOR DOMESTIC WATER HEATERS
Condensing,
(continued)
Burner and Venting
Safety Controls
As a minimum, the heater will be equipped with the following:
•a
•two immersion operating thermostats
•an immersion temperature limiting device
•a stack temperature limiting device
•an ASME- or
•and options as selected on form PV 6147
Warranty Summary
The burner and all heater parts will have a
replacement labor and freight costs under certain conditions. This summary is not a warranty. Consult warranty and policies for full details. Complete copies of all warranties and service policies, including all exclusions and conditions, will be presented to the owner as part of the submittal package.
Finishing
The storage and heating sections will be completely factory packaged and plumbed, requiring only job site hookup to utilities, venting, and potable water inlet and outlet. The heater will be insulated to meet current ASHRAE standards, jacketed with
Start Up
Start up on the unit will be performed by factory trained and authorized personnel. A copy of the start up report will be provided to the owner.
Quality Certification • Safety and Performance Standards
The heater will be UL or CGA listed. The water heaters will be manufactured by a company that has achieved certification to the ISO 9001 International Quality System.
PV 6149b 2/02 | 2 |