10.BURNER SETUP AND ADJUSTMENT
WARNING: The burner supplied with this water heater has been factory adjusted to operate on the type gas, gas pressure, manifold pressure and firing rate identified on the burner data decal and must be verified after installation and adjusted as required to obtain those values. Firing this burner above the burner decal specified firing rate will void the warranty, and may result in improper operation, a fire or explosion, or dangerous carbon monoxide, causing property damage, personal injury or death.
See the burner and water heater data decals for the proper firing rate, gas pressure requirements and other important information.
Head Adjustment | Air Adjustment |
Manifold Pressure Tap
Top View of Gas Valve
Top View of Gas Valve | Adjusting the Firing Rate |
SU3 Gas Manifold
10
