![](/images/new-backgrounds/1314306/31430617x1.webp)
MOTOR
Many
Do not operate your tool on a current on which the voltage is not within correct limits. Do not operate tools rated A.C. only on D.C. current. To do so may seriously damage the tool.
EXTENSION CORD SELECTION
If an extension cord is used, make sure the conductor size is large enough to prevent excessive voltage drop which will cause loss of power and possible motor damage. A table of recommended extension cord sizes will be found in this section. This table is based on limiting line voltage drop to 5 volts (10 volts for 230 volts) at 150% of rated amperes.
If an extension cord is to be used outdoors, it must be marked with the suffix W- A or W following the cord type designation. For example –
RECOMMENDED EXTENSION CORD SIZES FOR USE WITH PORTABLE ELECTRIC TOOLS
Length of Cord in Feet
| 115V | 25 Ft. | 50 Ft. | 100 Ft. | 150 Ft. | 200 Ft. | 250 Ft. | 300 Ft. | 400 Ft. | 500 Ft. | |
| 230V | 50 Ft. | 100 Ft. | 200 Ft. | 300 Ft. | 400 Ft. | 500 Ft. | 600 Ft. | 800 Ft. | 1000 Ft. | |
|
|
|
|
|
|
|
|
|
|
| |
| 18 | 18 | 18 | 16 | 16 | 14 | 14 | 12 | 12 | ||
|
|
|
|
|
|
|
|
|
|
| |
Rating | 18 | 18 | 16 | 14 | 14 | 12 | 12 | 10 | 10 | ||
18 | 18 | 16 | 14 | 12 | 12 | 10 | 10 | 8 | |||
|
|
|
|
|
|
|
|
|
| ||
18 | 18 | 14 | 12 | 12 | 10 | 10 | 8 | 8 | |||
Ampere | 18 | 16 | 14 | 12 | 10 | 10 | 8 | 8 | 6 | ||
18 | 16 | 12 | 10 | 10 | 8 | 6 | 6 | 6 | |||
|
|
|
|
|
|
|
|
|
| ||
18 | 14 | 12 | 10 | 8 | 8 | 6 | 6 | 4 | |||
Nameplate | |||||||||||
|
|
|
|
|
|
|
|
|
| ||
16 | 14 | 10 | 8 | 8 | 6 | 6 | 4 | 4 | |||
16 | 12 | 10 | 8 | 6 | 6 | 6 | 4 | 2 | |||
|
|
|
|
|
|
|
|
|
| ||
16 | 12 | 10 | 8 | 6 | 6 | 4 | 4 | 2 | |||
|
|
|
|
|
|
|
|
|
| ||
| 14 | 12 | 8 | 8 | 6 | 4 | 4 | 2 | 2 | ||
| 14 | 12 | 8 | 6 | 6 | 4 | 4 | 2 | 2 | ||
|
|
|
|
|
|
|
|
|
|
|
SAVE THESE INSTRUCTIONS!
CARTON CONTENTS
Carton contents include the sander, an instruction manual, and a parts list.
FUNCTIONAL DESCRIPTION
FOREWORD
The
9