PYLE Audio manual Specifications, Input Impedance, Pyle Home PCM60A Manual

Specifications

Input Impedance

AUX 1/AUX 2/AUX 3	200mV/50k-Ohm, Unbalanced
MIC 1/MIC 2/MIC 3		1.0mV/600-Ohm, Balanced
TEL/PAGE	100mV/600-Ohm, Balanced
Max Output Power		100 Watts x 1
THD at rated output power		1% or less at 1 kHz
Frequency Response +/- 3 dB		................. 50 Hz to 15 kHz
Signal to Noise Ratio A-Weighted
MIC		60dB
AUX		70dB
TEL		60dB
Speaker Outputs		4-Ohm, 8-Ohm, 16-Ohm,
		25V, and 70V line outputs
AUX Output		600-Ohm 1V
Monitor (MOH) Output	600-Ohm 1V (head phones)
		and 8-Ohm 1W (speaker)

Attenuation Level (AUX 1/AUX 2/AUX 3/MIC 2/MIC 3)...40dB

Tone Controls
Treble		+/- 10dB, 10 kHz
Bass		+/- 10dB, 100 Hz
Power Requirement	120V AC 60Hz/230V AC 50Hz
Power Fuse	T 2.5AL 250V for 110-120V and
	T 1.2AL 250V for 220-240V
Dimensions, inches (mm) WxHxD		16.93 x 3.46 x 10.51
		(430 x 88 x 267)
Weight, lbs (kg)		14.88(6.75)

Specifications are typical; individual units might vary.

Specifications are subject to change and improvement without notice.

Your Pyle Home Amplifier is an example of superior design and

7 - Pyle Home PCM60A Manual