+
| PARTS DESCRIPTION | |
6 | 1. | Mesh: cartridge inside |
2. Tube | ||
| 3. | Power LED indicator |
| 4. | Power and Mute switch: Switch on and off the microphone. |
|
| Move the switch to middle position to mute the mic. |
| 5. | Battery compartment |
6.Battery Cover
7.CH selector
-
+
-
ON DIP
1 2 3 4
ON
OFF
7
OPERATION
1.Unscrew the battery cover at the end of the microphone. Install the provided 2 1.5V batteries, taking care to fit it with the correct polarity connected.
2.According to frequency Chart on the battery cover, adjust the CH selector to make the microphone to be the same frequency as receiver.
3.Check the battery by switching the microphone ON. The red LED will come on. This indicates correct operation. If the red LED is dim, this indicates the battery is low and should be changed. If the red LED does not come on at all, it indicates the battery is dead and should be replaced.
FREQUENCY CHART
CH00 CH01 CH02 CH03 CH04 CH05 CH06 CH07 795.2MHz 795.8MHz 796.4MHz 797.0MHz 797.6MHz 798.2MHz 798.8MHz 799.4MHz
CH08 CH09 CH10 CH11 CH12 CH13 CH14 CH15 800.0MHz 800.6MHz 801.2MHz 801.8MHz 802.4MHz 803.0MHz 803.6MHz 804.2MHz
2
