Note:
- If no keys are pressed or held for 60 seconds, it will return to the existing mode.
- Press and hold the MODE/SET key for 3 seconds at anytime during the setting mode to exit and
all revised setting will be saved.
- The stride length range is limited to 20 ~ 180cm (8” to 5’ 11”) for both run and walk. If the
calibration result is outside this range, the previous stride length is used.
- During stride length calibration, holding the MODE/SET key will terminate the calibration process
and "FAIL" will appear on the screen.
- If calibration has not been performed before, the stride length will be set based on the height
formula.
Once the stride is calibrated, it will replace the default stride value calculated based on Height
value.
Downloading/Installing PC-Link Program
Please visit our website at http://www.hrmpclink.com/g-series.htm to download the
interface program .
Note: Windows Vista may not allow the download of the program due to its security
protection software therefore we advise you to download the program using D drive.
17