PYLE Audio PHRM22

USER SETTING MODE

1. Press the MODE/SET key until you have reached the SETTING

mode which will have a banner showing USER displaying

SETUP

2. Press and hold the MODE/SET button for around 3 seconds to

enter into configuring the user setting

3. The first setting is the unit in which you wish your measurements

to be measured and recorded in. There are two options which is

the combination of CM for height and KG for weight or IN for

height and LB for weight which can be manipulated by press

the LAP/SAVE/- or ST/SP/+ button

4. Press MODE/SET key to confirm. The next setting is gender and

this again can be selected by scrolling through the sexes via the

ST/SP/+ or LAP/SAVE/ - button

5. Press MODE/SET key to confirm and set your age. To increment

the age, press the ST/SP/+ button and to decrement the age,

press the LAP/SAVE/ - button

6. Confirm by pressing MODE/SET key and to increment the weight,

press the ST/SP/+ button and to decrement the weight, press the

LAP/SAVE/ - button

7. Confirm by pressing MODE/SET key and to increment the height,

press the ST/SP/+ button and to decrement the height, press the

LAP/SAVE/ - button

8. To exit the setting mode, press and hold the MODE/SET key for

around 3 seconds or wait for one minute when it will automatically

exit the mode itself but previous settings will remain unchanged