AV Display Mode: | Remote Control |
Operating method: Press the button“AV1/AV2” on the remote control unit to choose AV display mode. If the VCD or DVD signal is connected, there should be display normally pictures signal ;If the VCD or DVD signal isn't connected, AV character should be appear top the left corner and the screen is blue.. the system will display “NO SIGNAL”.
1.BRIGHTNESS
2.COLOR
3.CONTRAST
4.TINT(only NTSC system)
5.LANGUAGE
6. SCALING(16:9/4:3)
The above functions can be executed by MENU on the display
or remote control unit.
1. Brightness: Press the MENU button on the display or MENU on
the remote control unit, then press: “ 
” “ 
” button on the display or “ 
”” 
” keys on the remote control unit to choose what you need.
2.COLOR: Press the MENU button on the display or MENU on the remote control unit thrice , then press: “ 
” “ 
” button on the
display or “ 
” “ 
” keys on the remote control unit to choose what you need.
3.Contrast Ratio: Press the MENU button on the display or MENU on the remote control unit twice, then press: “ 
” “ 
” button on
the display or “ 
” “ 
” keys on the remote control unit to choose what you need.
4. TINT：Press the MENU button on the display or MENU on the remote control unit four times , then press: “ 
” “ 
” button on the display or “ 
” “ 
” keys on the remote control unit to choose what you need0
5．Language : please press the manual of unit or the remote control six
times, then press“ 
”“ 
”on the unit or“ 
”“ 
”on the remote control to select you need..
6. scaling: Press the MENU button on the display five times , then press: “ 
” “ 
” button on the display to choose .
3 | 4 |
