PYLE Audio PLCD15MR owner manual CD Operation

OPERATION

CD OPERATION

•SELECT TRACKS

Press button (16) or button (17) to move to the previous track or the following track. Track number shows on display.

Hold press button (16) or button (17) to fast reverse or fast forward. Disc play starts from when you release the button.

•PAUSE PLAYING

Press /MUTE button (3) to pause CD player. Press it again to resume play.

•REPEAT THE SAME TRACK

Press RPT button (22) to continuously repeat the same track. Press it again to stop repeat.

•PREVIEW ALL TRACKS

Press INT button (24) to play first several seconds of each track on current disc. Press it again to stop intro scan and listen to track.

•PLAY ALL TRACKS IN RANDOM Press RDM button (23) to play all tracks on the current disc in random. Press it again to cannel the function.

•PROGRAM CD TRACKS

Use Program function to select up to

32tracks to play in any order. Program works by allowing you to select a track number for each spot in the playing sequence. A CD must be inserted and in CD playing mode to use Program. - How to program CD tracks

1.Press MEM button (20) to enter Program mode, then “PGM” stars flashing and “P-01” icon appear on the display.

2.Press button (16) or button (17) to choose track number. For example,

select track 6, then press MEM button (20) to memorize it and “P- 02” will appear on the display. So track 6 will be played first. Thus, you can also press / buttons (17) and (16) to choose track number 10 and press MEM button, then “P- 03” will appear. So track 10 will be secondly played. Repeat these operations, and you can program CD tracks to your need. If you completed program setting, press PGM button (21) to play CD in programmed order.

Note: Using Program function can only select up to 32 tracks to play in any order. When you have selected 32 tracks to be programmed. “FULL” will appear on the display.

-When the CD is played in programmed order by pressing PGM button (21), pressing it again will exit PGM mode.

-When the disc is playing in programmed order, pressing MEM button (20) will cancel the all programmed content and “CLR” appears on the display.

-If you don’t press MEM button (20) to carry out program setting, then press PGM button (21), “NO-P” will appear.

•TRACK/TIME DISPLAY

Press AS/PS (ELAPSE) button (2) to show running time/remain time of track.

•EJECT

When the front panel is sliding down, press EJ button (4) to eject the disc.

10