Pioneer DEH-P6000UB Initial Settings, Adjusting initial settings, Turning the off clock

Section
04		Initial Settings
	Adjusting initial settings		4 Turn MULTI-CONTROL to put a clock
	1 Press SRC and hold until the unit turns		right.
			# You can also perform the same operations by
	off.
			pushing MULTI-CONTROL up or down.
	2 Press MULTI-CONTROL and hold until
	CLOCK SET appears in the display.		Turning the off clock
	3 Turn MULTI-CONTROL to select one of
			display on or off
	the initial settings.
			If the off clock display is turned on and the
	CLOCK SET (clock)—OFF CLOCK (off clock)—
	FM STEP (FM tuning step)—AUTO PI (auto PI		sources and the feature demo are off, the
	seek)—WARNING TONE (warning tone)—		clock display appears on the display.
	AUX1 (auxiliary input 1)—AUX2 (auxiliary		1 Use MULTI-CONTROL to select
	input 2)—DIMMER (dimmer)—SW CONTROL
			OFF CLOCK.
	(rear output and subwoofer controller)—
	DEMO MODE (feature demo)—EVER SCROLL		2 Press MULTI-CONTROL to turn the off
	(ever scroll)—BT AUDIO (Bluetooth audio)—		clock display on.
	PIN CODE INPUT (pin code input)—		# To turn the off clock display off, press
	BT VER INFO (Bluetooth version information)		MULTI-CONTROL again.
	—TITLE SETTING (multi language)
	# You can also perform the same operations by
	pushing MULTI-CONTROL up or down.		Setting the FM tuning step
	# You can also select the function by pressing
			Normally the FM tuning step employed by
	FUNCTION on the remote control.
			seek tuning is 50 kHz. When AF or TA is on,
	# To cancel initial settings, press BAND/ESC.
			the tuning step automatically changes to 100
	# BT AUDIO, PIN CODE INPUT and
			kHz. It may be preferable to set the tuning step
	BT VER INFO can be selected only when Blue-
			to 50 kHz when AF is on.
	tooth adapter (e.g., CD-BTB200) is connected to
	this unit.		1 Use MULTI-CONTROL to select FM STEP.
	Setting the clock		2 Press MULTI-CONTROL to display the
			setting mode.
	Use these instructions to set the clock.		# Press BACK to return to the previous display.
	1 Use MULTI-CONTROL to select		3 Turn MULTI-CONTROL to select the FM
			tuning step.
	CLOCK SET.
			Turning MULTI-CONTROL switches the FM
	2 Press MULTI-CONTROL to display the		tuning step between 50 kHz and 100 kHz while
	setting mode.		AF or TA is on. The selected FM tuning step ap-
	# Press BACK to return to the previous display.		pears in the display.
	3 Press MULTI-CONTROL to select the seg-		# You can also perform the same operations by
			pushing MULTI-CONTROL up or down.
	ment of the clock display you wish to set.
	Each time you press MULTI-CONTROL, one		Note
	segment of the clock display is selected.		The tuning step remains at 50 kHz during manual
	Hour—Minute
			tuning.
	As you select segments of the clock display,
	the selected segment blinks.

30 En