Pioneer DEH-P6000UB Receiving PTY alarm broadcasts, Storing the strongest broadcast frequencies

	Section
Operating this unit	02

#You can also store the frequency in memory by pushing and holding MULTI-CONTROL right.

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station. Press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# To return to the ordinary display, press

BAND/ESC or LIST.

# If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display.

Receiving PTY alarm broadcasts

When the emergency PTY code broadcasts, the unit receives it automatically (ALARM ap- pears). When the broadcasting ends, the sys- tem returns to the previous source.

!An emergency announcement can be can- celed by pressing TA.

!To return to the main menu, press and hold BACK.

!To return to the ordinary display, press BAND/ESC.

!If MW/LW band is selected, you can only se- lect BSM or LOCAL.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies.

1Use MULTI-CONTROL to select BSM in the function menu.

2Press MULTI-CONTROL to turn BSM on. The six strongest broadcast frequencies are

stored in the order of their signal strength.

# To cancel, press MULTI-CONTROL again.

English

Introduction of advanced operations

1Press MULTI-CONTROL to display the main menu.

2Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option. Press to se- lect.

3Turn MULTI-CONTROL to select the function.

BSM (best stations memory)—REGIONAL (re- gional)—LOCAL (local seek tuning)—

PTY SEARCH (program type selection)— TRAFFIC (traffic announcement standby)—AF (alternative frequencies search)—NEWS (news program interruption)

Notes

!You can also select the function by pressing FUNCTION on the remote control.

!To return to the previous display, press BACK.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

%Press LOCAL repeatedly to select the desired setting.

FM: OFF—LEVEL 1—LEVEL 2—LEVEL 3—

LEVEL 4

MW/LW: OFF—LEVEL 1—LEVEL 2

The LEVEL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

Note

You can also perform this operation in the menu that appears by using MULTI-CONTROL.

Selecting alternative frequencies

When the tuner cannot get a good reception, the unit automatically searches for a different station in the same network.

En 13