Pioneer DEH-P6000UB Switching the Ever Scroll, Activating the BT AUDIO source, Initial Settings

Section
04		Initial Settings
	When REAR SP (rear speaker setting) is se-		Switching the Ever Scroll
	lected.		When Ever Scroll is set to ON, recorded text in-
	REAR SP :SUB W (subwoofer)—
			formation scrolls continuously in the display.
	REAR SP :FULL (full-range speaker)
			Set to OFF if you prefer the information to
	When PREOUT (RCA output setting) is se-
			scroll just once.
	lected.
	PREOUT:SUB W (subwoofer)—		1 Use MULTI-CONTROL to select
	PREOUT:REAR (full-range speaker)
			EVER SCROLL.
	# When no subwoofer is connected to the rear
			2 Press MULTI-CONTROL to turn the Ever
	output, select REAR SP :FULL.
	# When a subwoofer is connected to the rear		Scroll on.
	output, set for subwoofer REAR SP :SUB W.		# To turn the Ever Scroll off, press
			MULTI-CONTROL again.
		Notes
	! Even if you change this setting, there is no		Activating the BT AUDIO source
		output unless you turn the subwoofer output
		on (refer to Using subwoofer output on page	You need to activate the BT AUDIO source in
	28).		order to use a Bluetooth audio player.
	! If you change this setting, subwoofer output		! You can only operate this function when
		in the audio menu return to the factory set-	Bluetooth adapter (e.g. CD-BTB200) is con-
		tings.	nected to this unit.
	! Both rear speaker lead outputs and RCA rear		1 Use MULTI-CONTROL to select
		output are switched simultaneously in this
			BT AUDIO.
		setting.
			2 Press MULTI-CONTROL to turn the
	Switching the feature demo		BT AUDIO source on.
			# To turn the BT AUDIO source off, press
	The feature demo automatically starts when		MULTI-CONTROL again.
	power to this unit is turned off while the igni-
	tion switch is set to ACC or ON.		Entering PIN code for
	1 Use MULTI-CONTROL to select
			Bluetooth wireless connection
	DEMO MODE.
	2 Press MULTI-CONTROL to turn the fea-		To connect your cellular phone to this unit via
			Bluetooth wireless technology, you need to
	ture demo on.
			enter PIN code on your phone to verify the
	# To turn the feature demo off, press
			connection. The default code is 0000, but you
	MULTI-CONTROL again.
			can change this in this function.
		Notes	! With some Bluetooth audio players, you
			may be required to enter the Bluetooth
	! Remember that if the feature demo continues		audio player PIN code in advance to set
		operating when the car engine is turned off, it	this unit for a connection.
		may drain battery power.	! You can only operate this function when
	! You can also turn on or off feature demo by		Bluetooth adapter (e.g. CD-BTB200) is con-
		pressing DISP while this unit is turned off. For	nected to this unit.
		more details, see About the demo mode on
		page 7.

32 En