Pioneer DEH-P6000UB Tuner, Basic Operations, Adjusting the volume, Operating this unit

Section
02		Operating this unit
	! Charging the portable audio player using		Tuner
		car’s DC power source while connecting it to	Basic Operations
		AUX input may generate noise. In this case,
		stop charging.	% Select a band
	! External unit refers to a Pioneer product (such
			Press BAND/ESC.
		as ones available in the future) that, although
			# Band can be selected from among FM1, FM2,
		incompatible as a source, enables control of
			FM3 or MW/LW.
		basic functions with this unit. Two external
		units can be controlled with this unit. When	% Manual tuning (step by step)
		two external units are connected, the external	Push MULTI-CONTROL left or right.
		unit is automatically allocated to external unit	% Seek tuning
		1 or external unit 2 by this unit.
	! When this unit’s blue/white lead is connected		Push and hold MULTI-CONTROL left or right
			for about one second and release.
		to the vehicle’s auto-antenna relay control
			# You can cancel seek tuning by pushing
		terminal, the vehicle’s antenna extends when
		this unit’s source is turned on. To retract the	MULTI-CONTROL left or right.
			# If you push and hold MULTI-CONTROL left or
		antenna, turn the source off.
			right, you can skip stations. Seek tuning starts as
	Adjusting the volume		soon as you release MULTI-CONTROL.

%Use MULTI-CONTROL to adjust the sound level.

Notes

!This unit’s AF (alternative frequencies search) function can be turned on and off. AF should be off for normal tuning operation (refer to the next page).

!RDS service may not be provided by all sta- tions.

!RDS functions such as AF and TA are only ac- tive when your radio is tuned to an RDS sta- tion.

Storing and recalling broadcast frequencies

You can easily store up to six broadcast fre- quencies for later recall.

!Six stations for each band can be stored in memory.

1 Press LIST.

Preset screen is displayed.

2Use MULTI-CONTROL to store the se- lected frequency in memory.

Turn to change the preset number. Press and hold to store.

12 En