PYLE Audio PLCD26 instruction manual Disc Play

Models: PLCD26

1 4
Download 4 pages 13.76 Kb
Page 4
Image 4
DISC PLAY:

11.LOC/RPT BUTTON

LOCAL/DISTANCE MODE:

When in the radio mode, press them to select local or distance broadcast station receive sensitivity. The word LOC will appear on LCD during local state.

Attention: During AM mode, LOC is non-functional.

REPEAT MODE:

During CD mode. Press RPT button to repeat a single track.

12.LUD/RDM BUTTON

LUD MODE:

When reduce the volume to half level, press it to enhance the bass effect.

RDM MODE:

During CD mode, press " RDM " button and hold for 2 seconds, it display " RDM " and Random function performs.

13.EQ BUTTON

Press it to switch between 4 preset equalizer curves: FLAT, POP, CLAS, ROCK. The sound quality will be changed.

14.CLOCK ADJUSTMENT BUTTON

During frequency display, press it to change to clock function.

Press the button for more than 2 seconds, until time flashes. and you can adjust time now.

Press the tune Manual backgroundManual background button or Manual backgroundManual background continually to adjust Hours and Minutes, when adjustment is completed, press CLK button to resume normal play state and retain the adjustment

IMPORTANT:

MEMORY WIRE ( FOR BACKUP) AND POWER WIRE CAN NOT BE SWITCHED OFF AT THE SAME TIME, ONCE IT HAPPENS, ALL THE FUNCTION WILL BE TOTALLY IN DISORDER (DISTORTED DISPLAY IS ALSO INDICATED ).

IF IT REALLY HAPPENS, PLEASE FOLLOW THE INSTRUCTIONS AS MENTIONED BELOW:

5 MINUTES LATER, PLEASE SWITCH ON THE MEMORY WIRE FIRST (CAN NOT PASS THROUGH IGNITION SWITCH) AND THEN SWITCH ON THE POWER. IT WILL RETURN TO NORMAL FUNCTION SOON.

DISC PLAY:

Cleaning discs

Before playing, clean the disc with a clean, lint-free.

Flip the disc in the direction of the arrow.

NOTE:

. Do not use so solvents such as benzine, thinners. Commercially available cleaners or anti static spray damage the unit.

Insert a disc with the label surface down. Doing so may damage the unit.

Label surface up

NOTE:

. Do not try to insert another disc when one has been already inserted. Doing so may damage the unit.

.Handle the disc by its edge. And to keep the disc clean, do not touch the surface.

.Do not stick paper or tape on the disc.

.Do not expose the disc to direct sunlight or heat sources such as hot air ducts. Or leave it in a car parked in direct sunlight where there can be a considerable rise in temperature.

Page 4
Image 4
PYLE Audio PLCD26 instruction manual Disc Play