Follow this easy wiring diagram in order to enable you to install the new or existing RADIO and SPEAKER wring system.
Be sure the unit is connected to a 12 volts battery with negative ground. Good ground connections eliminate most electrical noise problem and require tight with the metal vehicle chassis. remove plastic, paint or dust for good electrical contact.
CAR ANTENNA
RED RCH
WHITE LCH RCA line out
SPEAKER WIRING
The unit is only designed for the use with 4 speakers system, it can only be connected with speakers rated in the load impedance range from 4 to 8 ohms. Load impedance less than 4 ohms could damage the unit.
Never combine (BRIDGE) the outputs for use with 2 speakers, and Never ground any Negative speaker to the chassis ground.
CAR ANTENNA
RED |
|
| RCH | RCA line out | |
|
| ||||
WHITE |
|
| LCH |
| |
|
|
| |||
Connect to control for antenna | Orange |
or remote control for amplifier. | |
Memory+ | YELLOW |
Connect to battery or +12 volts of power source that is always live.
Ground-Black
12V+Red
Connect to lgnition key switch.
Green | Grey |
Green | Grey |
/white | /white |
Left Front | Right Front |
Brown | Blue |
Brown | Blue |
/white | /white |
Left Rear | Right Rear |
10
