PYLE Audio PLCD79MP instruction manual Specification, Location and Function of Controls

SPECIFICATION

GENERAL
Supply Voltage	DC 13.8V. Negative Ground
Current Consumption	Max.10A
Power Output	25W X 4.
Unit Dimensions	178[W] X 165[D] X 50[H] mm.
FM SECTION
Frequency range	87.5MHz -107.9MHz
Effective sensitivity	3uV.
I.F Frequency	10.7MHz.
AM SECTION
Frequency range	530KHz - 1710KHz
Effective sensitivity	40dB.
I.F Frequency	450KHz
RCA LINE OUT (OPTION)
Output	CD Max. 1200mv
CD PLAYER
System	Compact Disc Audio System.
Suitable CDs	CD/CD-R/CD-RW/MP3 Disc
Signal format	Sampling frequency 44.1KHz.
	NO. of quantization bits 1bit.
Frequency characteristics	20-100Hz <\	5dB
S/N Ratio to CD	10-20KHz <\	5dB.
	50dB [1KHz]
Number of channels	2 STEREO channels.

LOCATION AND FUNCTION OF CONTROLS

1.OPEN BUTTON

Press the OPEN button to fold down the front control panel.

Then a CD can be inserted into the CD slot or ejected by pressing the EJ button at the back of the front control panel.

2.3. SEL BUTTON (Select) AND VOL(MENU)+/- KNOB

a)Press the SEL button briefly to select the mode of sound mode item by item, such as VOLUME, BASS, TREBLE, BALANCE and FADER.

Now the settings of them can be adjusted by rotating the VOL + /- knob. (Note: If equalizer settings such as POP and JAZZ have been selected in DSP, it is impossible to change to BASS and TREBLE.)

b)Press the SEL button and hold for more than 1 second to access the menu mode. Now press the SEL button briefly to select the menu mode as follows: DSP (DSP OFF / POP M / JAZZ M / CLASS M / FLAT M), BEEP ON/OFF, SEEK 1/2, VOL LAST/ADJ.

13 2