PYLE Audio PLD179U Display/Adjust Time Displaying time, Adjusting time, LCD Display, Flashing LED

desired item. Also press ◄/► button (30) to choose the desired item.

Display/Adjust Time

1. Displaying time:

Press DISP button (15) to show current information and time on the LCD. Return to original status after 5 seconds.

2. Adjusting time:

1). Press and hold DISP button (15) until the clock begins blinking.

2). Press ￿/￿ or ◄/► button to move to between hour area and minute area.

3). Rotate VOL button (10) or ▲/▼ to adjust hour or minute.

LCD Display

Exhibit current information and activated functions on the LCD display (8).

Flashing LED

The LED (26) will flash if the front cover is not inserted into the main unit.

ESP function

If the unit has the electronic shockproof function, it can be shockproof about several seconds:

CD, VCD: 18 seconds.

MP3: 160 seconds.

DVD: 6 seconds.

MPEG4: 20 seconds.

Turning Loudness on/off

Loudness introduces a special low- and high-frequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to bass and treble sound. Press LOUD button (2) to switch loudness on/off.

Equalization

Press EQ button (3) repeatedly to cycle though the following equalization mode:

FLAT→CLASSICS→POP M→ROCK M →DSP OFF

Mute Function

Press MUTE button (19) to mute down the sound instantly, press it again to recover previous volume level.

Mode Function

Press MODE (6) to switch between the DVD, AV and TUNER.

Last Position Memory

-During disc playback, if you press button (9) to turn off the unit and then press the button again to turn on the unit, the DVD unit will resume playing from the point that it was interrupted.

-During disc playback, if you press MODE button (6) to switch to other mode, and then return to DVD mode again, the unit will resume playing from the point that it was interrupted.

Sub-Woofer Function

This unit is equipped with a sub-woofer output jack. When a sub-woofer is connects to this unit. Press VOL button

(10)repeatedly to select SUBW and then rotate VOL button to turn sub-woofer output on/off.

Reset Function

RESET button on the housing must be activated with either a ballpoint pen or thin metal object. The RESET button (12) is to be activated for the following reasons:

-Initial installation of the unit when all wiring is completed.

-All the function buttons do not operate.

-Error symbol on the display.

Note:

If press RESET button(12), the unit can't work yet, please use a cotton swab soaked in isopropyl alcohol to clean the disc socket.

8