Remote Control
Preparing the Remote Control
Installing The Lithium Coin Battery
1.First push to inside as the direction indicated by the arrow (See 1 )And then
Remove the battery holder as the direction indicated by the arrow (See 2 ).
2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ).
3.Insert the battery holder. Push in the holder to the original position(See 4 ).
CR2025
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal receiver), make sure there is no obstacle in between .
Operation angle: About 
30 degree in each the direction of the front of the IR mark.
Warning :
Do not install any battery other than CR2025 or its equivalent; otherwise , it may explode .
Store the battery in a place where children cannot reach to avoid risk of accident .
11
