PYLE Audio PLD43MU owner manual Disc Operation, Basic Operation, Dvd

DISC Operation

Basic Operation

During the DISC playback, use the finger touch the touch screen , it display will following :

1		2	3	4	5	6
						MOD
	VOL- SEL			VOL+
12	11	10		9	8	7

1.previous	7.To next page
2.next	8.eject
3.pause	9.vol+(adjustment +)
4.stop	10.select
5.mute	11.vol-(adjustment -)
6.mode	12.panel angle change

Switching the DVD mode

MOD Touch the MOD section on the touch screen (or press MOD button ) to select the DISC mode, it display like following :

DVD	11-0:44:36
		MOD
VOL-	SEL	VOL+

Function setup

(different the source the display is different)

Stopping Play

Touch the screen the range (or press the button on remote control .) To stop the unit playback. Touch the section or press button on front panel to start play.

Skipping Track

During DISC playback, Touch the section on the touch screen to skip to next track. (You can also swing the SEL knob in direction to skip to next track.)

During DISC playback, Touch the section on the touch screen to

skip to back one track .( You can also swing the SEL knob in direction to back one track .)

NOTE :

1.In DVD mode, touch the section continually twice to back one track .

2.For some VCD2.0 disc (PBC-playback control), above these buttons may be unavailable .

Rapid Forward/Rapid Reverse

During DISC playback, Touch and hold (for about 2 seconds )the

/ section on the touch screen (or swing the SEL knob in / direction on front panel and hold for a more than 2 seconds)

the speed of rapid forward/reverse changes according to the disc as follow:

DVD/VCD/CD/MP3:

Normal Playback 2x 4x 8x 16x

Pause (still picture)

Touch the “ ” section on touch screen during playback will stop play temporary, touch it again to return the normal playback .

Zoom Function

ZOOM	Repeatedly touch the section of
	the ZOOM, the displaying rate can
	be 1x, 2x, 3x, 1/2, 1/3, 1/4 .

21