OPERATING INSTRUCTIONS
2. PART NAMES AND FUNCTIONS
Thank you for purchasing headrest monitor. Please read this manual carefully before operating and reserve it for future reference. It will be helpful to you if you encounter any operational problem.
USE INSTRUCTION
1.Please connect the power line and the video line for the unit and power box.. Putting through the nine core cables of the unit to the nine core connector on the power box. Connect the audio and video with AV IN on the box. Connect the DVD output signal with DVD OUT1/DVD OUT2 for output signal. Connect the power line, Red for ACC, Yellow for +12v AND Black for GND.
2.Connect the power wire, turn on the power, it will display the “DVD” picture.
15 | MODE _ MENU + | |
14 |
|
|
|
| |
|
|
|
1
PLD7HB
SD | USB |
| 16 |
|
| AV/DVD | 2 |
3.It will be auto identify for the PAL system and NTSC system. If the connection is correct it will be show the picture with clearly and colorful.
4.To adjust the brightness, contrast, color, tint for the best result that you need.
5.This set is with USB transfer line, it will be convenience for connect with USB driver.
1. MAINLY SPECIFICATION
Name: Headrest DVD monitor
Pixel format:1440X234 Resolution
System:PAL/NTSC
Power: DC+12V / ±10%
Consumption: 7W
Function: AV+DVD+SD+USB
Picture: 7 inch (16:9)
With function remote control 6M
1
13 | 11 | 6 | 5 | 4 |
12 |
| 8 7 |
| |
| 10 9 |
|
3
1.Press to open the monitor,
2. 
Power: ON/OFF
3. 
Play: DVD Stop, Press will resume playback
4. 
Stop: ON Play, Press to stop play.
5. AV/DVD:AV/DVD selection button
6.IR receiver window
7. 
Forward
8.
REV
9. 
Next button
10.
Previous button
11.+:Volume + or sub manual up
12.Manu: press to manual
14.Mode: Selection for 16:9 or 4:3
15. SD:SD carder reader
16.SUB:Mini USB connector
2
