BASIC OPERATION
Stopping Play
-Brief press the STOP button to stop the unit playback, when press the PLAY button it can continuous normal playback.
-Press STOP button twice, it will stop the playback and go back to initial Track/Chapter.
Rapid Forward/Rapid Reverse
Press 
FF & 
REW during play. Each time the button is pressed, the speed of rapid forward/reverse changes according to the disc as follow.
DVD/VCD/CD/MP3
Normal Playback 
2X 
4X 
6X 
8X
Skipping Track
Press SKIP 
/ 
during playback. Press 
to skip to next track, and 
to back one track.
Note: For some VCD 2.0 dics 
/ 
buttons may be unavailable.
Pause (still picture)
Press 
during playback.
Return to normal playback.
Press 
once again.
Repeat
Press the REPEAT button to select repeat mode as follow.
REPEAT 1 
REPEAT 
REPEAT OFF
DVD/CD DISC
1.Continuously repeat at the current chapter/track, when selected REPEAT 1 mode.
2.Select REPEAT mode to continuously repeat all chapter/track on the current disc.
3.When the player finish playback the current discc last chapter/track, it will stop display the elapsed time. When selected REPEAT OFF mode (REPEAT & REPEAT disappear at VFD display).
VCD
REPEAT feature not support VCD 2.0 (with PBC).
Illumination (ILL)
Press ILL to adjust the light of the VFD display in the following order. Brightness Level
4 
3 
2 
1
Choose higher brightness level will increase the VFD lighting.
Reset
Reset button is placed on the housing and must be activated with either a ball point pen or thin metal object. The reset button is th be activated for the following reasons:
-Initial installation of the unit when all wiring is completed.
-All the function buttons do not operate.
-Error symbol on the display.
Open
Press OPEN to fold down the front panel.
Remote Sensor (IR)
Point the remote handset to the remote sensor. Receive the signal from remote handset.
Flash LED
If the front panel do not install in the main unit, the LED will be flashing.
Tuning the player off
Press the POWER button in front of panel or press 
on remote control.
12
